Regal, LLC

15 showcases shown.

• 
  Brookings, SD

  Grain Systems Addition

  Additional spouting for a feed mill conveyor systemRegal, LLC was able to provide a solution for a feed mill that needed an addition bypass in their grain system. We were able to offer a simple concept that operates smoothly and is easy to maintain.
• 
  Beresford, SD

  Bridge Structure Repair

  Added and repaired structural members on bridge girdersRegal, LLC provides assistance any many bridge projects, including repairs to existing structures. By adding structural steel stiffeners, the girders were able to be lifted off the footings to replace failing components.
• 
  Big Stone City, SD

  Waterline Bore Casing

  Bore casing assembly and weldingRegal, LLC completed another bore casing job for a contractor responsible for updati g a rural water system. Our role in this job was to assemble and weld the casing so the next crew could install it under the highway.
• 
  Big Stone City, SD

  Bridge Guardrail Install

  Welded splice joints in a prefabricated guardrail system for a bridge walkwayRegal, LLC recently put the finish touches on a guardrail system on a walking path on a bridge in Big Stone City, SD. Getting the rail secure and finished up was a final item in getting the project signed off and completed.
• 
  Brookings, SD

  Miscellaneous Chassis Repairs

  Equipment repair servicesRegal, LLC has done many small repairs on the bottle chassis trailers for Certarus in Brookings. Wear and tear from thousands of miles on the road takes it's toll on these trailers, and we make sure that all necessary structural repairs are completed to keep the drivers in safe operation. This particular job was fixing cracked welds in the landing gear.
• 
  Yankton, SD

  H-Pile Welding in Yankton, SD

  H-pile welding for bridge footingsRegal, LLC was called onto another new bridge build in Yankton, SD to weld the splice joints on the footing pilings. When an H-pile has to go deeper than a single length of steel, the sections get spliced, and that joint carries everything the bridge puts on the pile beneath it. Bridge splice welds are governed by AWS D1.5, the Bridge Welding Code. It's a stricter standard than the D1.1 structural code used on most steel work, and it requires a separate qualification. We're one of only a handful of D1.5 certified companies in South Dakota, which is why we get called onto new bridge construction across the state.
• 
  Menno, SD

  Bridge Pile Welding in Menno, SD

  AWS D1.5 certified pile splice welding for bridge foundationsRegal, LLC was brought onto another bridge project in Menno, SD to get the piling welded and in the ground. Pile splices are a hold-up point for a foundation crew. The next section can't be driven until the splice weld is finished and accepted, so time spent waiting on a welder is time the whole crew stands still. Bridge pile welds fall under AWS D1.5, the Bridge Welding Code. It's a stricter standard than the D1.1 code used on most structural steel, and it takes a separate qualification to hold. We're one of only a handful of D1.5 certified companies in South Dakota, which is why foundation crews call us when a splice has to be turned around without slowing the drive.
• 
  Kearney, NE

  Structural Steel Welding in Kearney, NE

  Mobile welding on joists, stairs, and structural membersRegal, LLC was called down to Kearney, NE to back up the structural steel crew on a sports complex build, welding joists, stairs, and other structural members. Steel erection runs on sequence. When a crew is a welder short, connections stack up and the whole raise slows down behind them. Bringing in a mobile welder for the stretch that needs it keeps the ironworkers setting steel instead of waiting on joint work. We run mobile, and distance isn't the deciding factor. Whether a steel crew needs an extra certified hand for a week or for a season, we'll make the drive.
• 
  Ashley, ND

  Crop Duster Landing Gear Repair in Ashley, ND

  Tube replacement on agricultural aircraft landing gearRegal, LLC was called out to Ashley, ND for a landing gear repair on a crop duster. We removed the damaged tubing and fitted and welded in new material. Ag aircraft take punishment most planes never see. Short strips, rough turf, heavy loads, and a whole season compressed into a few weeks. Landing gear tubing is usually where that shows up first. Tube work like this is a different discipline from structural or bridge welding. Thin wall, tight clearances, and no tolerance for distortion, on a part where the fit-up matters as much as the bead. We turned it around in the off-season, with room before the next spray season.
• 
  Lake Norden, SD

  Process Piping Fabrication

  Stainless steel pipe fabrication for a water treatment facilityRegal, LLC completed stainless steel piping project for a waste water treatment facility near Lake Norden. We were able to tie the exterior plumbing to the mechanical components inside to keep the product flowing correctly.
• 
  Lake Benton, MN

  Custom Platform Installation

  Design, fabrication, and install of a platform over a manure pitRegal, LLC proudly presents another job completed for one of our returning customers. This platform is a custom project that was designed, built, and installed seamlessly to provide a safer environment for the customer.
• 
  Sioux Falls, SD

  Walk/Bike Path Bridge

  Structural steel frame for path bridgeRegal LLC was able to provide service for a contractor building a bridge alongside the Big Sioux River in Sioux Falls. Getting the framework braced and supported in a timely manner allowed the concrete crew to set the deck and keep the job flowing.
• 
  Watertown, SD

  Process Piping Modification

  On site pipe fabricationRegal, LLC was recently asked to make some field changes to a number of piping components at Watertown's waste water facility. Getting these done allowed the project to continue forward, keeping everyone on schedule.
• 
  Frederick, SD

  Steel Pile Welding

  Welding pile for new bridge footingsRegal LLC is one of the few companies in the area who is licensed and certified with SDDOT to weld on bridge construction/repair projects. On this job, we were able to weld the footing piles together so the next crew could form up and pour the footings.
• 
  De Smet, SD

  Steel Bore Casing

  Water line bore casing for a water treatment facilityRegal LLC was asked to help with various projects throughout the construction of the water treatment facility near De Smet, SD. This particular part of the project was assembling the bore casing, enabling the water line to be installed under the highway.